Classical PPC Speed Bump 33 x 25 x 5 cm

Classical PPC Speed Bump 33 x 25 x 5 cm; is for slowing down the vehicle traffic and ensuring pedestrian and vehicle safety.
To assemble a speed bump set, you need plastic speed bump mid-sections ( the number depends on the road width) and two endcaps.
The end caps increase the durability of the speed bump and prevent the vehicle wheels from damage during the pass.
Classical series speed bumps aim to reduce vehicle speeds to 10 km/h.

Made of heavy-duty PVC with a chequered pattern to provide extra grip even in poor weather conditions, Classical PPC Speed Bump 33 x 25 x 5 cm is suitable for tarmac and concrete road surfaces.
Every midsection weighs 1,5 kg, endcap weighs 415  gr. There are four pre-drilled holes on the midsections and two on the endcaps.

Where can PPC Speed Bumps be used?

on arterial and collector roads
in open and closed parking lots
at school crossings
at pedestrian crossings
at fuel stations
in industrial facilities
at airports
in military facilities
Speed ​​bumps are used wherever traffic flow has to be calmed down.

How To Assemble A Plastic Speed Bump?

Before ordering a Plastic Speed Bump, measure the road/place where you will place it. Let a gap of 50 cm on the right and left sections of the road. To install, first clean the surface of stone, mud and dirt, then mark the position of bolts, drill the required holes and the correct size, insert the fixing and then secure the speed bump in place.

Technical Features

Dimensions: 50 x 334 x 250 mm
Material: PPC
Colour: Yellow
Weight: midsection-1,5 kg
endcap – 415 gr
Certification: DIN EN ISO 9001:2008
Additional Information: 3  oval  reflective lenses on each side increase the visibility,
Installation: Simply surface mount with 10 x 120 mm screws and 16 mm plastic fixing plugs
GTIP: 3926.90.97.90.18