Oval PPC Speed Bump 33 x 30 x 4 cm; slows down the speed of vehicles on public roads such as schools, hospitals, and anywhere reduced vehicle speeds are desired. To form a speed bump set Oval PPC Speed Bump 33 x 30 x 4 midsections and two Oval PPC Speed Bump Endcaps 11 x 30 x 4 cm are required.
Oval PPC Speed Bump 33 x 30 x 4 cm
Description
Oval PPC Speed Bump 33 x 30 x 4 cm; is for slowing down the vehicle traffic and ensuring pedestrian and vehicle safety.
To assemble a speed bump set, you need plastic speed bump mid-sections ( the number depends on the road width) and two endcaps.
The end caps increase the durability of the speed bump and prevent the vehicle wheels from damage during the pass.
Made of heavy-duty PVC with a chequered pattern to provide extra grip even in poor weather conditions, Oval PPC Speed Bump 33 x 30 x 4 cm is suitable for tarmac and concrete road surfaces.
Every midsection weighs 1,4 kg, endcap weighs 250 gr. There are four pre-drilled holes on the midsections and two on the endcaps.
Where can PPC Speed Bumps be used?
on arterial and collector roads
in open and closed parking lots
at school crossings
at pedestrian crossings
at fuel stations
in industrial facilities
at airports
in military facilities
Speed bumps are used wherever traffic flow has to be calmed down.
How To Assemble A PPC Speed Bump?
Before ordering a PPC Speed Bump, measure the road/place where you will place it. Let a gap of 50 cm on the right and left sections of the road. To install, first clean the surface of stone, mud and dirt, then mark the position of bolts, drill the required holes and the correct size, insert the fixing and then secure the speed bump in place.
Technical Features
Dimensions: 40 x 334 x 300 mm
Material: PPC
Colour: Yellow
Weight: midsection-1,4 kg
endcap – 250 gr
Certification: DIN EN ISO 9001:2008
Additional Information: 3 oval reflective lenses on each side increase the visibility,
Installation: Simply surface mount with 10 x 120 mm screws and 16 mm plastic fixing plugs
GTIP: 3926.90.97.90.18
