Solar Road Stud with Shank; durable road stud body is produced from aluminium alloy, the solar-powered LEDs are covered with polycarbonate lens.
Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tons.
Technical Features
Dimensions : 2,8 x 12,5 x 14,5 cm
Material: Aluminium
LED Color: red, yellow optional
Weight :0,48 kg
IP Rating: IP 65
Installation : Ø 3.0 x (H)5.0 cm anchor with epoxy application
GTIP: 9405.49.90.00.00
| Electronic Circuit Technical Features | ||
| Solar Panel | Type: | Monocrystalline silicon cell |
| Dimensions (H/L): | 54 x 60 mm | |
| Voltage: | 3 V | |
| Watt: | 0.4 W | |
| Material: | Ni-MH | |
| Chargeable Battery | Voltage: | 1.2 V |
| Current: | 2000 mA/h | |
| LED | Color: | Red-Yellow |
| Dimensions (ø10-5 mm) | Ø 5 mm – 3+3 Led | |
| Flash Rate: | 120 f/min | |
| Visibility Distance: | 100 m (night) | |
| Operation Time: | With daylight charging – whole night | |
| Operating Temparature: | -20ºC/+60ºC | |
