Road Marking Paints specially produced for use in line-markings are durable, weather-resistant and have high visibility.

  • Constance Road Marking Paint 25 kg; Constance Road Marking Paint is an MMA Cold Plastic Paint. Constance Road Marking Paint is suitable for interior and exterior use. Constance Marking Paint can be used in indoor applications such as factory floors, warehouses, hospitals and sports halls and outdoors on roads, cycle paths, school playgrounds and car parks etc. It should not be applied on alkyd-based cold road marking paints and damp, wet and frosty surfaces. This single-component paint reflects light thanks to glass beads sprinkled on it. The best way to apply this paint is to spray it with a thickness range of 350 -800 microns. Drying occurs by evaporation of the solvent in paint. Technical Features Application Temperature: 5 °C- 40 °C Maximum Humidity: 80% Drying Time: 20 min. (air temperature 17°C, ground temperature 22°C, 49% humidity, 6 km/h wind) Packaging : 25 kg / Tin Viscosity: 90 ± 10 (23°C±1) Application: with an airless or pneumatic paint sprayer, brush, roller. Use without diluter Surface: Asphalt and concrete Feature: Cold road marking paint with MMA based acrylic resin component. Storage: Store in dry and regularly ventilated indoor areas, keep away from fire. Cleaning: With cellulosic thinner Wet Paint Consumption Amount: 800 gr / m² Glass Bead Application Amount: 350 gr / m² Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. New concrete must be allowed to fully cure which can take up to 3 months. In all cases, a small area should be tested before application. Mix thoroughly before use. If the concrete/asphalt is particularly porous, a thinner first coat should be applied to seal the surface. This should then be followed by another coat applied 1-2 hours after the sealer coat. A minimum thickness of 350 microns is recommended. GTIP: 3208.90.91.00.22
  • MMA Road Marking Paint 5 kg; Constance Road Marking Paint is an MMA Cold Plastic Paint. Constance Road Marking Paint is suitable for interior and exterior use. Constance Marking Paint can be used in indoor applications such as factory floors, warehouses, hospitals and sports halls and outdoors on roads, cycle paths, school playgrounds and car parks etc. It should not be applied on alkyd-based cold road marking paints and damp, wet and frosty surfaces. This single-component paint reflects light thanks to glass beads sprinkled on it. The best way to apply this paint is to spray it with a thickness range of 350 -800 microns. Drying occurs by evaporation of the solvent in paint. Technical Features Application Temperature: 5 °C- 40 °C Maximum Humidity: 80% Drying Time: 20 min. (air temperature 17°C, ground temperature 22°C, 49% humidity, 6 km/h wind) Packaging : 5 kg / Tin Viscosity: 90 ± 10 (23°C±1) Application: with an airless or pneumatic paint sprayer, brush, roller. Use without diluter Surface: Asphalt and concrete Feature: Cold road marking paint with MMA based acrylic resin component. Storage: Store in dry and regularly ventilated indoor areas, keep away from fire. Cleaning: With cellulosic thinner Wet Paint Consumption Amount: 800 gr / m² Glass Bead Application Amount: 350 gr / m² Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. New concrete must be allowed to fully cure which can take up to 3 months. In all cases, a small area should be tested before application. Mix thoroughly before use. If the concrete/asphalt is particularly porous, a thinner first coat should be applied to seal the surface. This should then be followed by another coat applied 1-2 hours after the sealer coat. A minimum thickness of 350 microns is recommended. GTIP: 3208.90.91.00.22
  • Silicon Glass Beads 25 kg; Glass beads are mixed in road marking paints or/and sprinkled on the paint to increase the night visibility of road markings. Especially in rainy weather, it is nearly impossible to see the road lines so it's essential to use glass beads for road safety. GTIP: 3208.90.91.00.22
  • Two-Component Road Marking Paint 25 kg; The two-component MMA resin-based road marking paint "MF 21 ", is an ideal solution for crosswalks, stop lines and rumble strips, which play an important role in traffic safety.  Two-component road-marking paints have high physical and chemical resistance and stick to the surface by hardener with the reaction that occurs as a result of mixing the components in certain amounts.  The road marking paint meets the requirements of the TS EN 1871, TS EN 1436 and Highways Technical Specification. The thickness of paint film can be between 1 mm and 5 mm Technical Features Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Viscosity (Daniel): 13 ±1 Density: 2,00 g / ml. ± 0,05 Luminance Factor Class: LF6 / β ≥ 0,80 Storage Stability: 6 and over Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. The drying occurs by the chemical reaction that is generated by mixing the powder B component with the liquid A component. Thus, the paint must be applied within maximum of seven minutes after mixing the B component. Glass beads can be poured on to increase its reflective effect. Do not apply in summer daytime and hot air. GTIP: 3208.90.91.00.22

Title

Go to Top