- Superior cable protection due to durable and impact-resistant material
- Ideal height, creating minimal disruption to cars and plant vehicles
- Bright yellow stripe provides high visibility
- Modular, easily interlocks with 3 Channel Cable Protectors to increase the length as needed
- Skidproof bottom surface
- Non-slip textured surface
- Suitable for indoor and outdoor
-
Cable Protector Ramp Corner Section; is essential to form speed bumps for corners. It is compatible with 3 Channel Cable Protectors. Cable Protector Ramps provide cost-effective protection of cables and prevent accidents. Ileritraffic speed bumps are made of mid and end parts which can be combined to obtain the desired length. You can make your own set with the midparts and two end parts/ covers.Technical Features Dimensions : 50 x 60 x 7,5 cm Material: PPC Colour: Black, yellow Weight : 3 kg Certification: DIN EN ISO 9001:2008 Operating Temperature: -20°C / +60°C Additional Information: 3 cable channels with Ø 5 cm Installation: Simply surface mount with 10 x 90 mm screws and 18 mm plastic fixing plugs -
5 Channel Cable Protector Ramp 90 x 55 x 5,5 cm; provides cost-effective protection of cables and prevents accidents. -
Rubber Ramp 50 x 30 x 4,5 cm - 3 Reflectives; gives access to car automotive vehicle, trailer, wheelchair, walker, lift, cart, motorcycle, bike, scooter and hand truck over curbs or elevated sidewalks. -
Solar Road Stud with Shank; durable road stud body is produced from aluminium alloy, the solar-powered LEDs are covered with polycarbonate lens. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tons. Technical Features Dimensions : 2,8 x 12,5 x 14,5 cm Material: Aluminium LED Color: red, yellow optional Weight :0,48 kg IP Rating: IP 65 Installation : Ø 3.0 x (H)5.0 cm anchor with epoxy application GTIP: 9405.49.90.00.00Electronic Circuit Technical Features Solar Panel Type: Monocrystalline silicon cell Dimensions (H/L): 54 x 60 mm Voltage: 3 V Watt: 0.4 W Material: Ni-MH Chargeable Battery Voltage: 1.2 V Current: 2000 mA/h LED Color: Red-Yellow Dimensions (ø10-5 mm) Ø 5 mm - 3+3 Led Flash Rate: 120 f/min Visibility Distance: 100 m (night) Operation Time: With daylight charging - whole night Operating Temparature: -20ºC/+60ºC -
Solar Road Stud; produced from aluminium alloy. Solar energy powered LEDs are protected with polycarbonate lens. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tons Technical Features Dimensions : 12 x 13,5 x 2,8 cm Material: Aluminium LED Color: red, yellow optional Weight :0,575 kg IP Rating: IP 65 Operating Temperature: -20°C/+60°C Installation : Ø14 x L70 x Ø8 mm, Ø30 x H50 mm GTIP: 9405.49.90.00.00 -
Solar Road Stud (2,8 x 12,5 x 14,5 cm); durable aluminium road stud with polycarbonate lens cover. Yellow or red LEDs are powered with solar energy and increase visibility at night. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions : 2,8 x 12,5 x 14,5 cm Material: Aluminium, Polycarbon cover LED Color: red, yellow optional Weight :0,575 kg IP Rating: IP 65 Installation : Ø14 x L70 x Ø8 mm, Ø30 x H50 mm anchor GTIP: 9405.49.90.00.00Electronic Circuit Technical Features Solar Panel Type: Monocrystalline silicon cell Dimensions (H/L): 54 x 60 mm Voltage: 3 V Watt: 0.4 W Material: Ni-MH Chargeable Battery Voltage: 1.2 V Current: 2000 mA/h LED Color: Red-Yellow Dimensions (ø10-5 mm) Ø 5 mm - 3+3 Led Flash Rate: 120 f/min Visibility Distance: 100 m (night) Operation Time: With daylight charging - the whole night Operating Temparature: -20ºC/+60ºC -
Solar Road Stud - Red; aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions: 2,8 x 12,2 x 14,6 cm Material: Aluminium, Polycarbon cover LED Color: red, yellow, white, blue, green Weight :0,62 kg Photometric Standard: EN 1463 ve BS 873 Installation: 7,5 x 80 mm Buildex screws, 12 plastic fixing plugs Additional Information: 1x1800 mAh NiMh rechargeable battery, 2 x 1.5 V 100 mA solar panel, 4 x 5 mm crystal LED (bi-directional) GTIP: 9405.49.90.00.00 -
Solar Road Stud - Yellow; aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions : 2,8 x 12,2 x 14,6 cm Material : Aluminium, Polycarbon cover LED Color: red, yellow, white, blue, green Weight :0,62 kg Photometric standart: EN 1463 ve BS 873 Installation :7,5 x 80 mm Buildex screws, 12 plastic fixing plugs Additional Information: 1x1800 mAh NiMh rechargeable battery, 2 x 1.5 V 100 mA solar panel, 4 x 5 mm crystal LED (bi-directional) -
Solar Road Stud - Blue; aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions : 2,8 x 12,2 x 14,6 cm Material: Aluminium, Polycarbon cover LED Color: red, yellow, white, blue, green Weight :0,62 kg Photometric standard: EN 1463 ve BS 873 Installation :7,5 x 80 mm Buildex screws, 12 plastic fixing plugs Additional Information: 1x1800 mAh NiMh rechargeable battery, 2 x 1.5 V 100 mA solar panel, 4 x 5 mm crystal LED (bi-directional) GTIP: 9405.49.90.00.00 -
Solar Road Stud - Green; aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pav ement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions : 2,8 x 12,2 x 14,6 cm Material: Aluminium, Polycarbon cover LED Color: red, yellow, white, blue, green Weight :0,62 kg Photometric standard: EN 1463 ve BS 873 Installation :7,5 x 80 mm Buildex screws, 12 plastic fixing plugs Additional Information: 1x1800 mAh NiMh rechargeable battery, 2 x 1.5 V 100 mA solar panel, 4 x 5 mm crystal LED (bi-directional) GTIP: 9405.49.90.00.00 -
Solar Road Stud - White; aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tonsTechnical Features Dimensions : 2,8 x 12,2 x 14,6 cm Material: Aluminium, Polycarbon cover LED Color: red, yellow, white, blue, green Weight :0,62 kg Photometric standard: EN 1463 ve BS 873 Installation :7,5 x 80 mm Buildex screws, 12 plastic fixing plugs Additional Information: 1x1800 mAh NiMh rechargeable battery, 2 x 1.5 V 100 mA solar panel, 4 x 5 mm crystal LED (bi-directional) GTIP: 9405.49.90.00.00 -
Road Stud with LED ( Tunnel Road Stud); polycarbonate road stud with high visibility especially produced for tunnels. GTIP: 9405.49.90.00.00 -
Metal Road Stud 12 x 12 x 2,8 cm; permanent road stud with Swareflex lenses produced from durable aluminium alloy. GTIP: 7304.39.83.10.00 -
Aluminium Road Stud with Shank 10 x 10 x 2 cm; double-sided road stud produced from durable aluminium alloy, ideal for permanent road delineation. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges, and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass. Technical Features Dimensions : 10 x 10 x 2 cm Material: Aluminium Colour: Grey Weight :0,32 kg Photometric Standart: EN 1463 ve BS 873 Installation: Ø20 x L50 mm shank and Epoxy Application Load Capacity: 25 T Additional Information:43 Swareflex glass beads on each side GTIP: 7304.39.83.10.00 -
Plastic Road Stud - Square; Road studs, also called raised pavement marker, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the center and at the edges, mark the parkings in car parks, traffic islands, the entrances of shopping malls, gas stations and sites, Raised pavement marker ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. The glass bead reflectors on the plastic road studs increase the night visibility.- high visibility with reflectors
- red and white reflectors color alternative
- durable, unbreakable, solid body and reflectors
- operating temperature range: -20°C/+60°C
