Each motorised trip begins and ends with a parking place. Where traffic there is a parking problem. Whether you drive a bicycle, a motorcycle, a car or a truck it doesn’t matter, you need a safe place to park.
Public parking areas and private parking spots require different equipment.
In public parking areas floor markings and traffic signs guide drivers safely to and out of a parking lot. Car stoppers, wall protectors and corner guards protect vehicles and walls from possible crashes and damage. In some parking garages stop go lights may be required.
For private parkings or garage fronts warning signs or parking posts are essential.
Safety mirrors eliminate blind points at garage entries and exits.
Ileri Traffic provides all required equipment for parking areas like safety mirrors, wall protectors, corner guards, bicycle parking, car park stoppers and parking posts for
-
Yellow Steel Car Stopper with Polycarbonate Base; Heavy-duty wheel stopper. The robust, impact-resistant steel wheel stopper is made of a steel tube (70 mm diameter) coated with electrostatic paint. -
Yellow Plastic Speed Bump 25 x 10 x 5 cm; is the cover for Yellow Plastic Speed Bump 35 x 25 x 5 cm which slows down the speed of vehicles on public roads such as schools, hospitals, and anywhere reduced vehicle speeds are desired. To form a speed bump set Yellow Plastic Speed Bump 35 x 25 x 5 cm midsections and two endcaps are required. -
Wide-Angle Traffic Safety Mirror for Confined Spaces - 30 cm; Safety mirror for outdoors with a diameter of 30 cm, suitable for use in confined spaces. Compared to other safety mirrors, the right, and left adjustment distances are very small, but because of its high convexity, it shows a wide area and is suitable for confined spaces. Technical FeaturesDimensions: Ø 30 cm Material: PPC- Frame, 2 mm Acrylic- Mirror Weight: Min/Max. Service Temperature: -20°C / +60°C GTIP: 3926.90.97.90.18 -
Under Vehicle Inspection Mirror Spare Part 30 cm; Spare Part for Under Vehicle Inspection Mirror 40 cm AAA40 with a wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. -
Under Vehicle Inspection Mirror Spare Part 30 cm; Spare Part for Under Vehicle Inspection Mirror 30 cm AAA30 with a wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. -
Under Vehicle Inspection Mirror Spare Part 19 x 38 cm; Spare Part for Under Vehicle Inspection Mirror 19 x 38 cm AAA19x38 with a wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. -
Under Vehicle Inspection Mirror 40 cm; Under Vehicle Inspection Mirrors are convex mirrors with wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. Under Vehicle Inspection Mirrors are;- Suitable for use in production areas, commercial buildings, public sector
- Ideal for searching under vehicles at immigration checkpoints
- Used by anti-bomb squads, drug search, customs, airlines, security, armed forces
- Ideal for security surveillance ports, airports, military bases
- Ideal for areas that are particularly difficult to access e.g. behind machinery
- Universally employable - view under, over, behind and on top
- Convex mirror surface for wide-angle vision
- Ergonomic aluminium handle
- Suitable for Interior or Exterior use
- Clip-on LED torch available
- Impact Resistant Toughened Float Glass Mirror face
- Lightweight, portable and easily stored
- Swivel castors for easy maneuverability underneath vehicles
-
Under Vehicle Inspection Mirror 30 cm; Under Vehicle Inspection Mirrors are convex mirrors with a wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. Under Vehicle Inspection Mirrors are;- Suitable for use in production areas, commercial buildings, public sector
- Ideal for searching under vehicles at immigration checkpoints
- Used by anti-bomb squads, drug search, customs, airlines, security, armed forces
- Ideal for security surveillance ports, airports, military bases
- Ideal for areas that are particularly difficult to access e.g. behind machinery
- Universally employable - view under, over, behind and on top
- Convex mirror surface for wide-angle vision
- Ergonomic aluminium handle
- Suitable for Interior or Exterior use
- Clip-on LED torch available
- Impact Resistant Toughened Float Glass Mirror face
- Lightweight, portable and easily stored
- Swivel castors for easy manoeuvrability underneath vehicles
-
Under Vehicle Inspection Mirror 19 x 38 cm; Under Vehicle Inspection Mirrors are convex mirrors with wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. Under Vehicle Inspection Mirrors are;- Suitable for use in production areas, commercial buildings, public sector
- Ideal for searching under vehicles at immigration checkpoints
- Used by anti-bomb squads, drug search, customs, airlines, security, armed forces
- Ideal for security surveillance ports, airports, military bases
- Ideal for areas that are particularly difficult to access e.g. behind machinery
- Universally employable - view under, over, behind and on top
- Convex mirror surface for wide-angle vision
- Ergonomic aluminum rod
- Suitable for Interior or Exterior use
- Clip-on LED torch available
- Impact Resistant Toughened Float Glass Mirror face
- Lightweight, portable and easily stored
- Equipped with wheels for easy maneuverability underneath vehicles
-
Two-Component Road Marking Paint 25 kg; The two-component MMA resin-based road marking paint "MF 21 ", is an ideal solution for crosswalks, stop lines and rumble strips, which play an important role in traffic safety. Two-component road-marking paints have high physical and chemical resistance and stick to the surface by hardener with the reaction that occurs as a result of mixing the components in certain amounts. The road marking paint meets the requirements of the TS EN 1871, TS EN 1436 and Highways Technical Specification. The thickness of paint film can be between 1 mm and 5 mm Technical Features Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Viscosity (Daniel): 13 ±1 Density: 2,00 g / ml. ± 0,05 Luminance Factor Class: LF6 / β ≥ 0,80 Storage Stability: 6 and over Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. The drying occurs by the chemical reaction that is generated by mixing the powder B component with the liquid A component. Thus, the paint must be applied within maximum of seven minutes after mixing the B component. Glass beads can be poured on to increase its reflective effect. Do not apply in summer daytime and hot air. GTIP: 3208.90.91.00.22 -
Traffic Safety Mirror 90 cm, Convex Mirror; Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices, prevent collisions at corners, intersections, and aisles they are an important traffic safety equipment.- Acrylic mirrors are 50 % lighter than glass mirrors and provide ease of installation and transportation
- Ileritraffic traffic safety mirrors are manufactured from 2 mm impact-resistant acrylic material.
- Acrylic mirrors have higher impact resistance (17 x stronger ) than glass mirrors.
- Acrylic mirrors are safer as glass pieces will not form in case of breakage and prevent injuries and cuts.
-
Traffic Safety Mirror 90 cm, Convex Mirror; Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices, prevent collisions at corners, intersections, and aisles they are an important traffic safety equipment.- Mirror part produced from float glass
- Heavy-duty steel consolidated ABS backing
- Supplied with heavy-duty steel mounting brackets and installation instructions
- Clear and sharp vision
-
Traffic Safety Mirror 80 cm - Convex Safety Mirror; Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices and prevent collisions at corners, intersections, and aisles they are essential traffic safety equipment. -
Traffic Safety Mirror 80 cm - (Yellow/Black); Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices, prevent collisions at corners, intersections, and aisles they are an important traffic safety equipment.Dimensions: Ø 80 cm Material: PPC- Frame, 2 mm Acrylic- Mirror Weight: 6 kg Certification: DIN EN ISO 9001:2008 Application: On Ø 50- Ø 75 mm pole with M Ø 8 special kit, with screw and fixing plug on the wall Min/Max. Service Temperature: -20°C / +60°C GTIP: 3926.90.97.90.18- Acrylic mirrors are 50 % lighter than glass mirrors and provide ease of installation and transportation
- Ileritraffic traffic safety mirrors are manufactured from 2 mm impact-resistant acrylic material.
- Acrylic mirrors have higher impact resistance (17 x stronger ) than glass mirrors.
- Acrylic mirrors are safer as glass pieces will not form in case of breakage and prevent injuries and cuts.
-
Traffic Safety Mirror 80 cm - (White/Red); Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices, prevent collisions at corners, intersections, and aisles they are an important traffic safety equipment.Dimensions: Ø 80 cm Material: PPC- Frame, 2 mm Acrylic- Mirror Weight: 6 kg Certification: DIN EN ISO 9001:2008 Application: On Ø 50- Ø 75 mm pole with M Ø 8 special kit, with screw and fixing plug on the wall Min/Max. Service Temperature: -20°C / +60°C GTIP: 3926.90.97.90.18- Acrylic mirrors are 50 % lighter than glass mirrors and provide ease of installation and transportation
- Ileritraffic traffic safety mirrors are manufactured from 2 mm impact-resistant acrylic material.
- Acrylic mirrors have higher impact resistance (17 x stronger ) than glass mirrors.
- Acrylic mirrors are safer as glass pieces will not form in case of breakage and prevent injuries and cuts.
-
Traffic Safety Mirror 80 cm: Traffic safety mirrors also called convex mirrors, are used to provide a wide view in parking lots, parking garages and intersections. Because they eliminate blind spots in warehouses and offices, and prevent collisions at corners, intersections, and aisles they are important traffic safety equipment.Dimensions: Ø 80 cm Material: PPC- Frame, 2 mm Acrylic- Mirror Weight: 6 kg Certification: DIN EN ISO 9001:2008 Application: On Ø 50- Ø 75 mm pole with M Ø 8 special kit, with screw and fixing plug on the wall Min/Max. Service Temperature: -20°C / +60°C GTIP: 3926.90.97.90.18- Acrylic mirrors are 50 % lighter than glass mirrors and provide ease of installation and transportation
- Ileritraffic traffic safety mirrors are manufactured from 2 mm impact-resistant acrylic material.
- Acrylic mirrors have higher impact resistance (17 x stronger ) than glass mirrors.
- Acrylic mirrors are safer as glass pieces will not form in case of breakage and prevent injuries and cuts.
- The set includes Acrylic mirror and 2 m-long metal pole with a flange
