- Numbers 0-9
- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
Number Stencil Set 25 x 50 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times. -
30 W Solar Street Light, Park Light; No more Electricity Bills! Use the clean and continuous energy of solar energy in streets, gardens, sites, and industrial facilities lighting this powerful LED lighting. 30 W Solar Powered LED Lighting provides 3600 LM power light output. -
Two-Component Road Marking Paint 25 kg; The two-component MMA resin-based road marking paint "MF 21 ", is an ideal solution for crosswalks, stop lines and rumble strips, which play an important role in traffic safety. Two-component road-marking paints have high physical and chemical resistance and stick to the surface by hardener with the reaction that occurs as a result of mixing the components in certain amounts. The road marking paint meets the requirements of the TS EN 1871, TS EN 1436 and Highways Technical Specification. The thickness of paint film can be between 1 mm and 5 mm Technical Features Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Viscosity (Daniel): 13 ±1 Density: 2,00 g / ml. ± 0,05 Luminance Factor Class: LF6 / β ≥ 0,80 Storage Stability: 6 and over Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. The drying occurs by the chemical reaction that is generated by mixing the powder B component with the liquid A component. Thus, the paint must be applied within maximum of seven minutes after mixing the B component. Glass beads can be poured on to increase its reflective effect. Do not apply in summer daytime and hot air. GTIP: 3208.90.91.00.22 -
Silicon Glass Beads 25 kg; Glass beads are mixed in road marking paints or/and sprinkled on the paint to increase the night visibility of road markings. Especially in rainy weather, it is nearly impossible to see the road lines so it's essential to use glass beads for road safety. GTIP: 3208.90.91.00.22 -
"Forklift" Stencil 100 x100 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
Snow Pole Guide Markers; Snow Poles provide warning to plough operators of the locations of fixed objects such as guardrails. They also provide warnings to drivers about culverts, drains and delineates lift lines Snow Pole Guide Markers. Our round poles are a highly visible target from any angle of approach, showing operators where to plough safely. Reflective sheeting provides safer guidance after dark.- Marks culverts and drains
- Locates junction boxes
- Supports banners and signs
- Delineates lift lines
-
Photoluminescent Laminated Foot Step Marking; Laminated floor sign for determining the pedestrian path and the points of social distance. Ideal for arranging the queue areas in pharmacies, airports, cash registers, cashiers, elevator fronts and hospitals.- Self-adhesive
- Durability increased by lamination
- Photoluminescent- doesn't need electricity to glow in the dark
- Available in all colours
- 35 cm length
-
200 mm Red-Green Traffic Light with Power LED; ideal for factory, warehouse, site and parking lot entrances. Lightweight and weather-resistant housing. Cap visor increases signal visibility in sunlight.Technical Features
Dimensions(Diameter): 200 mm Housing Dimension(H/W): 675 x 280 mm Housing Material: Polycarbonate (%100 PC) Housing Colour: Black LED: Power LED red, green Power Consumption: 7 Watt / Module Protection Rate: IP 65 Certification: TS EN 12368 Weight: 5,70 kg GTIP:8530.80.00.00.12 -
300 mm Red-Green Traffic Light with Power LED; ideal for factory, warehouse, site and parking lot entrances. Lightweight and weather-resistant housing. Cap visor increases signal visibility in sunlight.Technical Features
Dimensions(Diameter): 300 mm Housing Dimension(H/W): Housing Material: Polycarbonat (%100 PC) Housing Colour: Black LED: Power LED red, green Power Consumption: 7 Watt / Module Protection Rate: IP 65 Certification: TS EN 12368 Weight: GTIP:8530.80.00.00.12 -
Rubber Speed Bump with 6 Reflective Stripes 500 x 600 x 45 mm; Speed bumps are used to slow down the speed of vehicles on public roads such as schools, hospitals- anywhere reduced vehicle speeds are desired. They improve pedestrian safety, reinforce stop signs in parking lots and reduce the risk of accidents on private residential streets, driveways and parking lots. PPC and rubber speed bumps are prefered because of their benefits like never need painting, easy one-person installation, removable for snow ploughing or pavement maintenance cost-effective, and years of high performance with low maintenance. Speed bumps with cable protecting channels provide cost-effective protection of cables and prevent accidents. Ileritraffic rubber speed bumps are made of mid and end parts which can be combined to obtain the desired length. You can make your own set with the midparts and two end parts/ covers. Technical Features Dimensions : 600 x 500 x 45 mm Material: Rubber Colour: Black Weight : 10,55 kg Additional Information: 6 x reflective yellow road tapes Installation: Surface mount with 10 x 120 mm Trifon screws and 14 mm plastic fixing plugs GTIP: 4008.21.90.00.00 -
Channelizer, Curb Base 120 x 15 x 5 cm; Plastic Channelizer is a lightweight, durable traffic separator curb. Ideal for urban turn restrictions, curves and lane channelization in short any place where road delineation is needed.- Constructed of highly durable injection-moulded plastic that is resistant to ultraviolet light, ozone, and hydrocarbons.
- 10 reflective stripes increase day/night visibility
- ideal height protects any damage to vehicles
Technical Features Dimensions: 1200 x 150 x 50 mm Weight: 2,3 kg Material: PPC Installation: Ø18 x L90 x Ø10 mm screw & bolt Certification: DIN EN ISO 9001:2008 GTIP: 3926.90.97.90.18 -
Plastic Channelizer 110 x 15 x 10 cm; Plastic Channelizer is a lightweight, durable traffic separator curb. Ideal for urban turn restrictions, curves, parking lots and lane channelization in short any place where road delineation is needed. -
Plastic Road Separator with Cat's Eyes;- Bidirectional warning due to 4+4 Cat's Eyes in the middle of the base.
- Produced of highly durable injection-moulded plastic that is resistant to ultraviolet light, ozone, and hydrocarbons.
- High day/night visibility
-
Plastic Road Separator with Solar Flasher;- Produced of highly durable injection-moulded plastic that is resistant to ultraviolet light, ozone, and hydrocarbons.
- High night visibility due to solar flasher
- Reflective tapes on both ends
-
Key Lock Lift Out Parking Post; Keylock parking posts are ideal for detracting unauthorised or unwanted vehicles parking in your parking space, driveway or on private roads.Technical Features
Size :Metal Base Size:Weight :Material: Pipe - 2 mm Galvanized Sheet,Paint: Electrostatic powder paintInstallation:Colour Options: BlackAdditional Information: Integrated lock and white - yellow reflective tapeGTIP: 7326.90.98.00.19
