-
TPU tactile paving with 50 blisters. Easy applicable durable product. -
TPU tactile paving. Durable, long-lasting yellow tactile paving with dropped kerbs. -
Tactile Paving (Blister-Square Pattern); warns visually impaired people of pedestrian crossings with dropped kerbs. Longlasting, durable TPU paving. -
TPU Directional Tactile Paving - guides visually impaired people along a route or around obstacles. Easy to install, longlasting durable product. -
Yellow Plastic Speed Bump 25 x 10 x 5 cm; is the cover for Yellow Plastic Speed Bump 35 x 25 x 5 cm which slows down the speed of vehicles on public roads such as schools, hospitals, and anywhere reduced vehicle speeds are desired. To form a speed bump set Yellow Plastic Speed Bump 35 x 25 x 5 cm midsections and two endcaps are required. -
Rubber Corner Guard (Eco); protects corners on columns, pillars and walls from structural damage. Can be used in warehouses and parking areas. GTIP:4016.99.97.00.19 -
Rubber Car Stopper 165x16x10 cm; is essential because it helps drivers stay inside the designated parking spot and not beyond it. This reduces the risks of damaging interior walls and personal belongings. Rubber car stoppers are environmentally friendly as they are made from recycled rubber. Ideal for all types of parking lots. -
Parking Post with Eyelet; ideal for detracting unauthorised or unwanted vehicles in your parking space, driveway or on private roads. Equipped with top-mounted eyelets to form a continuous barrier.GTIP: 7326.90.98.00.19 -
Under Vehicle Inspection Mirror 30 cm; Under Vehicle Inspection Mirrors are convex mirrors with a wide-angle vision to carry out security checks on the underside of vehicles and areas that are difficult to view or access. Under Vehicle Inspection Mirrors are;- Suitable for use in production areas, commercial buildings, public sector
- Ideal for searching under vehicles at immigration checkpoints
- Used by anti-bomb squads, drug search, customs, airlines, security, armed forces
- Ideal for security surveillance ports, airports, military bases
- Ideal for areas that are particularly difficult to access e.g. behind machinery
- Universally employable - view under, over, behind and on top
- Convex mirror surface for wide-angle vision
- Ergonomic aluminium handle
- Suitable for Interior or Exterior use
- Clip-on LED torch available
- Impact Resistant Toughened Float Glass Mirror face
- Lightweight, portable and easily stored
- Swivel castors for easy manoeuvrability underneath vehicles
-
Metal Wheel Stop - 180x13cm, Car Stopper; produced from 2 mm metal and painted with electrostatically powdered paint and equipped with three white reflective collars. Car stopper, also known as parking curb, parking stopper or car stopper ensures vehicles stop at the proper location preventing damage to buildings, sidewalks, curbs and delicate landscapes. Inside your facility, they function as bumper cushions and protection for motorized carts, forklift trucks and vehicles operating in factories and warehouses. Ideal for retail/commercial/business parking lots, parking garages and municipalities. Wheel stops provide necessary order by delineating parking spots and ensuring proper distancing. Technical FeaturesSize: 180 x 13 x Ø7,6 cmMaterial: 2 mm - metalColour: Yellow, blackWeight: 8,5 kgInstallation: On the floor with Ø10 x 120 mm lag screw and, Ø16 mm plastic fixing plugsAdditional Information: 3 white Reflective Tapes, extra durability with 2 flangesGTIP: 7326.90.98.00.19 -
Metal Wheel Stop - 180x10cm, Car Stopper; produced from 2 mm metal and painted with electrostatically powdered paint and equipped with three white reflective collars. Car stopper, also known as parking curb, parking stopper or car stopper ensures vehicles stop at the proper location preventing damage to buildings, sidewalks, curbs and delicate landscapes. Inside your facility, they function as bumper cushions and protection for motorized carts, forklift trucks and vehicles operating in factories and warehouses. Ideal for retail/commercial/business parking lots, parking garages and municipalities. Wheel stops provide necessary order by delineating parking spots and ensuring proper distancing. Technical FeaturesSize: 180 x 10,5 x Ø 6 cmMaterial: 2 mm - metalColour: Yellow, blackWeight: 6,5 kgInstallation: On the floor with Ø10 x 120 mm lag screw and, Ø16 mm plastic fixing plugsAdditional Information: 3 white Reflective Tapes, extra durability with 2 flangesGTIP: 7326.90.98.00.19 -
Key Lock Lift Out Parking Post; Keylock parking posts are ideal for detracting unauthorised or unwanted vehicles parking in your parking space, driveway or on private roads.Technical Features
Size :Metal Base Size:Weight :Material: Pipe - 2 mm Galvanized Sheet,Paint: Electrostatic powder paintInstallation:Colour Options: BlackAdditional Information: Integrated lock and white - yellow reflective tapeGTIP: 7326.90.98.00.19 -
Photoluminescent Laminated Foot Step Marking; Laminated floor sign for determining the pedestrian path and the points of social distance. Ideal for arranging the queue areas in pharmacies, airports, cash registers, cashiers, elevator fronts and hospitals.- Self-adhesive
- Durability increased by lamination
- Photoluminescent- doesn't need electricity to glow in the dark
- Available in all colours
- 35 cm length
-
"Forklift" Stencil 100 x100 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
Silicon Glass Beads 25 kg; Glass beads are mixed in road marking paints or/and sprinkled on the paint to increase the night visibility of road markings. Especially in rainy weather, it is nearly impossible to see the road lines so it's essential to use glass beads for road safety. GTIP: 3208.90.91.00.22 -
Two-Component Road Marking Paint 25 kg; The two-component MMA resin-based road marking paint "MF 21 ", is an ideal solution for crosswalks, stop lines and rumble strips, which play an important role in traffic safety. Two-component road-marking paints have high physical and chemical resistance and stick to the surface by hardener with the reaction that occurs as a result of mixing the components in certain amounts. The road marking paint meets the requirements of the TS EN 1871, TS EN 1436 and Highways Technical Specification. The thickness of paint film can be between 1 mm and 5 mm Technical Features Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Viscosity (Daniel): 13 ±1 Density: 2,00 g / ml. ± 0,05 Luminance Factor Class: LF6 / β ≥ 0,80 Storage Stability: 6 and over Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. The drying occurs by the chemical reaction that is generated by mixing the powder B component with the liquid A component. Thus, the paint must be applied within maximum of seven minutes after mixing the B component. Glass beads can be poured on to increase its reflective effect. Do not apply in summer daytime and hot air. GTIP: 3208.90.91.00.22 -
Number Stencil Set 25 x 50 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Numbers 0-9
- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
"Triple Right Arrow" Stencil 100 x100 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
"Straight Forward" Stencil 100 x100 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
"Max. Speed 20" Stencil 100 x100 cm; Floor marking stencil, produced from aluminium, laser cut. Can be used multiple times.- Rustproof aluminium
- Great for spray painting, airbrushing, rolling or brushing.
- Easy to use
-
MMA Road Marking Paint 5 kg; Constance Road Marking Paint is an MMA Cold Plastic Paint. Constance Road Marking Paint is suitable for interior and exterior use. Constance Marking Paint can be used in indoor applications such as factory floors, warehouses, hospitals and sports halls and outdoors on roads, cycle paths, school playgrounds and car parks etc. It should not be applied on alkyd-based cold road marking paints and damp, wet and frosty surfaces. This single-component paint reflects light thanks to glass beads sprinkled on it. The best way to apply this paint is to spray it with a thickness range of 350 -800 microns. Drying occurs by evaporation of the solvent in paint. Technical Features Application Temperature: 5 °C- 40 °C Maximum Humidity: 80% Drying Time: 20 min. (air temperature 17°C, ground temperature 22°C, 49% humidity, 6 km/h wind) Packaging : 5 kg / Tin Viscosity: 90 ± 10 (23°C±1) Application: with an airless or pneumatic paint sprayer, brush, roller. Use without diluter Surface: Asphalt and concrete Feature: Cold road marking paint with MMA based acrylic resin component. Storage: Store in dry and regularly ventilated indoor areas, keep away from fire. Cleaning: With cellulosic thinner Wet Paint Consumption Amount: 800 gr / m² Glass Bead Application Amount: 350 gr / m² Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. New concrete must be allowed to fully cure which can take up to 3 months. In all cases, a small area should be tested before application. Mix thoroughly before use. If the concrete/asphalt is particularly porous, a thinner first coat should be applied to seal the surface. This should then be followed by another coat applied 1-2 hours after the sealer coat. A minimum thickness of 350 microns is recommended. GTIP: 3208.90.91.00.22 -
Constance Road Marking Paint 25 kg; Constance Road Marking Paint is an MMA Cold Plastic Paint. Constance Road Marking Paint is suitable for interior and exterior use. Constance Marking Paint can be used in indoor applications such as factory floors, warehouses, hospitals and sports halls and outdoors on roads, cycle paths, school playgrounds and car parks etc. It should not be applied on alkyd-based cold road marking paints and damp, wet and frosty surfaces. This single-component paint reflects light thanks to glass beads sprinkled on it. The best way to apply this paint is to spray it with a thickness range of 350 -800 microns. Drying occurs by evaporation of the solvent in paint. Technical Features Application Temperature: 5 °C- 40 °C Maximum Humidity: 80% Drying Time: 20 min. (air temperature 17°C, ground temperature 22°C, 49% humidity, 6 km/h wind) Packaging : 25 kg / Tin Viscosity: 90 ± 10 (23°C±1) Application: with an airless or pneumatic paint sprayer, brush, roller. Use without diluter Surface: Asphalt and concrete Feature: Cold road marking paint with MMA based acrylic resin component. Storage: Store in dry and regularly ventilated indoor areas, keep away from fire. Cleaning: With cellulosic thinner Wet Paint Consumption Amount: 800 gr / m² Glass Bead Application Amount: 350 gr / m² Colour: Blue, Yellow, Green, Red, White, Black, Orange, Grey. Application: Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance. New concrete must be allowed to fully cure which can take up to 3 months. In all cases, a small area should be tested before application. Mix thoroughly before use. If the concrete/asphalt is particularly porous, a thinner first coat should be applied to seal the surface. This should then be followed by another coat applied 1-2 hours after the sealer coat. A minimum thickness of 350 microns is recommended. GTIP: 3208.90.91.00.22 -
Eco Rubber Corner Guard; Corner Guards protect corners on columns, pillars and walls from structural damage. Can be used in warehouses and parking areas.- High impact-resistant rubber
- Chemical, weather and corrosion-resistant
- Can be used in Indoor and Outdoor environments
- Four high reflective stripes on each side
-
Rubber Wall Protector End Cap; completes the rubber wall guards at the ends. You have only to plug the end cap at the ends of the guards. Technical Features Dimensions: 35 x 6 x 10 cm Weight: 0,2 kg Material: EVA -
Steel Universal Protectors - Guards; Steel Universal Protectors - Guards are high impact safety barriers designed to protect property and machinery. Ideal for protecting stock, traffic routes and work areas, separating different traffic routes (e.g. stacker lanes in warehouses and passenger traffic), machinery, supports, columns, shelving, loading ramps, equipment etc.- Superior build quality & strength
- Hi-Vis colours
- For bolting down only
- Manufactured in 2 mm gauge quality steel.
- 8 steel bolts required per protector
-
Steel Corner Protection Guard - Corner Protector (30 x 20 cm); Steel Corner Protection Guards are high impact safety guards designed to protect corners, columns and shelves, especially in stock and work areas.- Superior build quality & strength
- Hi-Vis colours
- For bolting down only
- Manufactured of 8 mm gauge quality steel.
- 4 Steel bolts required per protector
-
Steel Corner Protection Guard; Steel Corner Protection Guards are high impact safety barriers designed to protect property and machinery. Ideal for protecting stock, traffic routes and work areas, separating different traffic routes (e.g. stacker lanes in warehouses and passenger traffic), machinery, supports, columns, shelving, loading ramps, equipment etc.- Superior build quality & strength
- Hi-Vis colours
- For bolting down only
- Manufactured in 2 mm gauge quality steel.
- 12 steel bolts required per protector
-
Rubber Corner Guard End Cap; complete the rubber corner guards at the top and the bottom. You have only to plug the end cap at the ends of the guards. GTIP: 4016.99.97.00.19
